PRODUCTOS

ER316/316L is a filler metal that is mainly used for welding low carbon molybdenum-bearing austenitic alloys. This alloy contains a low carbon content of a maximum 0.03%, which allows for a reduced likelihood of intergranular carbide precipitation without the use of stabilizers. ER316/316L has good resistance to corrosion and pitting in industrial and marine industries.

ER316LSi is a filler metal that is mainly used for welding low carbon molybdenum-bearing austenitic alloys. This alloy contains a low carbon content of a maximum 0.03%, which allows for a reduced likelihood of intergranular carbide precipitation without the use of stabilizers. ER316LSi is similar to ER316/316L except for its higher silicon content. The higher silicon content allows for ease in welding and a smooth bead appearance. ER316LSi is good for applications in chemical industries, shipbuilding, and industries where a very high resistance to corrosion is needed.

WT 316/316H-16 is a filler metal that is mainly used for welding alloys of similar composition. This alloy contains a low carbon content of between 0.04-0.08%, which allows for a higher tensile strength at higher temperatures. WT 316/316H contains molybdenum which allows for a better creep resistance at higher temperatures. This is often used in petrochemical industries as well as power plants and turbine components.

Standard: AWS A5.9, GB, JIS

Chemical Composition:

Supply Conditions :

1. Welding Wire(Tig,Mig):     0.8-2.5 mm

2. Semi-finished Wire:         2.0-5.0 mm

3. Wire Rod:                               5.0-20.0 mm

Factory: